Transfer a Wireless TV Signal

How to Transfer a Wireless TV Signal ?

A television signal can be transferred from one TV to another video display, providing that both have video inputs and outputs. A wireless Audio/video transmission system(wireless av sender) can transfer the signal and is available from an electronics store or the TV accessories section of a department store. Audio/video cables found in most households, but which can be acquired from the same stores as the wireless Audio/ Video transmission system, must be used as well.

Place the wireless tv transmitter next to the television(By the way, if your Television has HDMI port, you should use wireless transmitter with hdmi jack). Plug its power cord into an outlet. Insert one end of a video cable into the video output on the back panel of the TV (labeled "Composite" on some sets). Insert the other end of the video cable into the video input on the av transmitter. Repeat this procedure with an audio cable, only plugging the red and white plugs at one end into the red and white outputs on the TV and the red and white inputs on the av transmitter.

Place the wireless tv receiver next to a video display on which you want to watch the TV signal being transmitted wirelessly, for example, another TV. Plug the av receiver's power cord into an outlet. Insert one end of a video cable into the video input on the back panel of the video display device. Insert the other end of the video cable into the video output on the receiver. Repeat this procedure with an audio cable, only plugging the red and white plugs at one end into the red and white outputs on the av receiver and the red and white plugs on the other end into the red and white inputs on the video display device.

Turn on the TV to which the wireless tv transmitter is connected. Turn on the video display device to which the wireless tv receiver is connected. Press "Menu" on the remote that controls the video display device.

Navigate through the settings until you come to the "Video input" or similarly named menu. Select this menu. Highlight the video input to which the video cable is connected. Press the "Enter" or "OK" button, depending on the make of the remote. Press "Menu" to exit the settings so that you can watch the TV signal being transferred to the video display device.

next: AV Receiver